中文版     ENGLISH
QQ在線
點擊這里給我發消息
QQ在線
點擊這里給我發消息
QQ在線
點擊這里給我發消息
QQ在線
點擊這里給我發消息
QQ在線
點擊這里給我發消息
山城不銹鋼

不銹鋼卡壓水管安裝方法

瀏覽次數:2407      發布時間:2015/10/19   

 
1. 切斷管子
使用切管設備切斷管子,為避免刺傷封圈,請使用專用除毛刺器或銼刀將毛刺完全除凈。
Cutting pipe
Cut out the pipe with pipe cutting facilities. To avoid damaging the sealing ring, the pipe ends must be burred with special burring tool or file completely
2. 插入管子
將管子筆直地插入管件內, 注意不要碰傷橡膠圈。
Inserting pipe
Straight into the tube inside the tube, being careful not bumps rubber ring
3. 卡壓
把卡壓工具鉗口的環狀凹部對準管件端部內裝有橡膠圈的環狀凸部進行卡壓。
Compressing
Align the ring-form concave of pressing jaw with the rim on pree-fitting. In groove of which a rubber ring is mounted, and compress it by pressing tools
4. 確認卡壓尺寸
用六角量規確認尺寸是否正確, 卡壓處完全插入六角量規即封壓正確, 避免卡壓工具出現不良。
Identification of size of pree-fittings
Check conformity of the joint to the specified size by using hexagonal gauge. The joint is compressed correctly, provided the hexagong profile gauge could be inserted on the compressed position.

安裝三大注意事項 COUTION
不要刺傷管件中的O型密封圈。
管件要確定插入有效位置。
不要忘記卡壓作業。
COUTION
Do not break the O-shaped sealing ring mounted in the press-fitting groove.
Mount the press-fitting on the pipe end so that press-fitting edge is alignedwith marked line on the end.
Do not forget the compressing operation.

Copyright ? 2013 重慶市山城不銹鋼閥業有限公司 All Rights Reserved
地址:重慶市高新區陳家坪帝豪名都 8-15號  電話:023-68963772 68679972  傳真:023-68966921 設計&推廣:全民網絡
十一运夺金官网